Brass-Clad Triceratops Skull That Bites, Roars and Breathes Mist BR0006

All four effects run from a single control on the base. There is no separate switch for the light, the sound or the mist — one press starts them together, one press stops them.

• Motorized jaw — opens and closes on an exposed gear train
• Red LED eye — stays lit while the unit runs
• Roar audio — speaker in the base, timed to the jaw
• Mist breath — vapor rolls from the mouth as the jaw opens
• Brass-tone frill — the panel that separates it from every silver skull on the shelf

Fill the reservoir and a low cloud of vapor rolls out from the mouth as the jaw opens, settling over the base before it clears. Nothing is heated or burned — the unit turns plain water into cool mist, so there are no cartridges to buy and no refills beyond water itself. It is the effect that stops people mid-conversation when they walk past the shelf.

The frill is what makes a triceratops read instantly, and it is where this build spends its detail. Layered brass-tone panels fan out behind the skull in overlapping plates, edged against the silver of the brow horns and nasal horn. Seen from the side it fills the silhouette; seen head-on it squares up like a shield.

Why the brass matters: every other skull in this series runs cool — silver plate, chrome linkage, glass lenses. This one is the only warm object in the group. Set it next to the T-Rex and the difference is immediate: same scale, same one-button operation, completely different temperature. That is what makes them work as a pair rather than as two of the same thing.

Three things worth knowing up front, so nothing is a surprise when the box arrives.

• Batteries aren't included: you'll need 6 × AAA. Loose batteries can't travel by international air freight, so no set ships with them — any standard alkaline AAA will do.
• Runtime is around 30 minutes: that's continuous operation per set of batteries. This is a display piece you switch on when you want the effects, not something to leave running.
• Purified water only: use purified or distilled water in the mist reservoir. Tap water leaves mineral scale that will clog the unit over time. No oils, fragrances or additives.

You assemble the drive unit yourself. The motor, speaker, LED and mist components come as parts rather than a sealed module — fitting them is part of the build. The printed manual walks through those steps alongside the rest of the skull, so it stays approachable even if this is your first mechanical set.

Bricks and fit: all 926 pieces are molded in ABS to a tight clutch tolerance. Connections hold without creeping, so the finished skull keeps its pose on a shelf indefinitely, and pieces come apart cleanly if you want to rebuild.

Standard stud sizing throughout — the bricks interlock with most major brick systems if you want to extend the base or the display. BrickRoyal is an independent brand and is not affiliated with or endorsed by the LEGO Group.

Included:

• 926 building pieces
• Motor, speaker, LED and mist components
• Display base with control button
• Printed step-by-step manual
• Retail box

Not included:

• 6 × AAA batteries
• Purified water for the mist reservoir

Dust the skull with a soft dry cloth. Empty the mist reservoir when you're not running the model, and refill only with purified or distilled water — mineral scale from tap water is the main cause of a mist unit clogging. Keep the motor, speaker and LED away from water when cleaning, and keep the finished piece out of prolonged direct sunlight so the brass tones and silvers hold their color.

6 × AAA. Loose batteries can't be sent by international air freight, so no set ships with them. Standard alkaline AAA from any supermarket will do.

Around 30 minutes of continuous operation. Most owners switch it on to show it off rather than run it constantly, so a set lasts a good while.

No — all four effects run on the same circuit and start together from one button. If you want it silent, display it with the power off; the skull holds its pose either way.

Purified or distilled water only. Tap water leaves mineral scale that builds up and eventually clogs the unit. Never use oils, fragrances or any additive. Nothing is heated — the mist is cool vapor, and water is the only thing you ever need to refill.

Yes. The motor, speaker, LED and mist parts are fitted during the build rather than arriving as a sealed module. The printed manual covers those steps in the same format as the rest of the model.

Yes. The skull holds its pose whether or not the effects are running, so it works as a shelf piece on its own and you switch it on when you want it.

Circle the missing part on the relevant manual page, take a photo, and email it with your order number to support@brickroyal.com. We'll send the replacement free of charge, with nothing to return.

The build is substantial enough to be a real project, and the finished piece actually does something — which is what makes it land better than a static model for a birthday, anniversary or Christmas.

BrickRoyal is operated by Jiduoduo Co., Limited, which holds written authorization from the respective trademark owners to sell authorized products through brickroyal.com. Authorization period: Aug 10, 2026 – Aug 10, 2027.

Important: trademark authorization does not grant rights to any third-party IP — vehicle designs, character names, artwork, logos or other trademarks remain separate matters.

Jiduoduo Co., Limited · 2601, 26/F, Delta House, No. 3 On Yiu Street, Sha Tin, New Territories, Hong Kong SAR · +852 9324 7082 · Mon–Fri 9:00 AM–6:30 PM HKT. Brand enquiries: support@brickroyal.com. © 2026–Present BrickRoyal.

Adult collectible, ages 14+. Contains many small parts — not suitable for children under 3 (choking hazard). All bricks safe ABS. Painted and plated surfaces scratch-sensitive — use soft dry cloth. Batteries not included. Use purified or distilled water only in the mist reservoir.

BrickRoyal is an independent brand. BR0006 is an original design with a generic mechanical dinosaur theme and is not affiliated with, licensed by, or endorsed by the LEGO Group, or by any film, television or media franchise. After-sales: admin@brickroyal.com. General: support@brickroyal.com.