The base set is a complete, display-ready static model. Everything below is included:

• 1,127 precision ABS bricks — staged in numbered bags by build phase
• Metallic-grey hull panels with yellow and cyan accent elements; twin engine nacelle assemblies with cyan thruster rings
• Dual laser-cannon assemblies (hand-rotating); panoramic cockpit canopy (hand-opening); projectile-launch weapon module
• Display stand and printed nameplate — the model arrives display-ready
• Full-colour illustrated step-by-step manual

BR60559 uses a restrained three-colour palette — metallic grey, yellow and cyan — applied consistently across the hull so that each accent element reads as intentional rather than decorative noise:

• Fuselage — a long swept nose in smooth metallic-grey ABS, with a curved undercarriage and fine panel-line surface detail running the length of the hull
• Engine nacelles — twin outboard nacelles with cyan thruster rings and decorative engine-effect elements that catch light from the front or side angles
• Cannons — dual forward-facing assemblies on rotating mounts; yellow accent rings mark the cannon housings and give the nose section its most assertive visual detail
• Cockpit — a wide panoramic canopy that opens on a hinge; the interior has cockpit-panel detail visible through the clear section when closed

On its stand, the model presents at roughly desk height with the nose angled slightly upward — the nacelles and cannon assemblies are both visible from normal viewing distance.

At 1,127 pieces, BR60559 is a large-format build that rewards patience. The long fuselage assembles in sections; the nacelles and cannon mounts attach in the final stages when the main hull is rigid enough to hold the extended geometry without flex.

• Numbered staged bags — bricks arrive pre-sorted by build phase; no hunting through the full set for a single element
• Full-colour illustrated manual — large diagram format with part callouts at every step
• Cockpit assembly — the panoramic canopy section is the most detail-intensive phase; the hinge mechanism rewards careful alignment
• Stand and nameplate — assemble last, takes about 10 minutes; the nameplate slots into the stand face

Expect two to four sessions depending on your pace. The model should be built on a clean, stable surface — the long nose section can flex slightly mid-build until the full hull is locked together.

At 20 inches long, BR60559 needs thoughtful placement. The stand is included and sets the model at a slight upward angle so the nose, cockpit and nacelles all read from the front. Assembled dimensions on stand:

• 20.0 × 19.6 × 10.1 in (50.7 × 49.9 × 25.6 cm) — length × width × height
• The cannon barrels extend past the nose measurement — allow forward clearance beyond 50.7 cm
• The nacelles set the width — they extend laterally from the fuselage, so a surface ≥55 cm deep is ideal
• Best surfaces: a wide study desk, display cabinet with ≥55 cm depth, office credenza or dedicated model showcase

Keep away from direct sunlight (can yellow white or light grey ABS over time) and from heat sources. Dust with a soft dry cloth; avoid water or damp environments.

BR60559 suits experienced adult builders who want a large, finished display piece rather than a quick assembly. The 1,127-piece count is a committed multi-session build; the 20-inch final length means the result earns its dedicated surface rather than slotting into a general shelf.

It works as a gift for sci-fi enthusiasts, collectors of large-format display models and anyone drawn to the retro-futurist visual language. Because it arrives on its own stand with a nameplate, the recipient can display it immediately — the base build is complete and needs nothing extra to show.

Gift-box dimensions: 39 × 9.5 × 29 cm — a manageable flat-pack size that wraps and ships cleanly.

No. The base build is a complete static display model. The panoramic cockpit opens and closes, the dual cannon assemblies rotate and the projectile module deploys — all by hand, without any power. The upgrade kit adds motorised cannon rotation, electric cockpit opening and LED lighting effects, and is entirely optional. Batteries are not included in either version.

The optional power-upgrade kit (sold separately) adds: a motorised rotating cannon system, an electric cockpit-opening mechanism, a transmitter function and live LED lighting effects for the engine and hull. It requires the M motor, 2.4G remote and rechargeable battery box that come with the kit. Batteries are not included and must be supplied by you. Email us if you want to confirm compatibility before buying the upgrade.

On its stand: 20.0 × 19.6 × 10.1 in (50.7 × 49.9 × 25.6 cm). The cannon barrels project past the 50.7 cm nose measurement — plan for at least 55–60 cm of clear length in front of the stand. The nacelles set the width, so a surface at least 55 cm deep helps. A wide desk, display credenza or deep cabinet shelf is the right home for this model.

The base set includes a manual mode-switch on the cannon assembly that changes the weapon configuration between positions by hand — no motor required. In the powered upgrade version, this switching is motorised and remote-controlled. Either way the feature is built into the model; only the actuation method changes between base and upgrade.

Email admin@brickroyal.com within 48 hours of delivery with a short unboxing video and clear photos showing the issue. If parts are confirmed missing or damaged, we send replacements free of charge — no return required.

BR60559 is an adult collectible, recommended for ages 14 and up. It contains many small parts and is not suitable for children under 3 due to choking hazard. Younger builders should only build under adult supervision. It is not designed or sold as a children's toy.

BrickRoyal is operated by Jiduoduo Co., Limited, which holds written authorization from the respective trademark owners to sell the authorized products through brickroyal.com. Authorization period: Aug 10, 2026 – Aug 10, 2027.

Important: trademark authorization does not grant rights to any third-party intellectual property — spacecraft or vehicle designs, character names or likenesses, artwork, logos or other trademarks remain separate matters.

Jiduoduo Co., Limited · 2601, 26/F, Delta House, No. 3 On Yiu Street, Sha Tin, New Territories, Hong Kong SAR · +852 9324 7082 · Mon–Fri 9:00 AM–6:30 PM HKT. Brand enquiries: support@brickroyal.com. © 2026–Present BrickRoyal.

BR60559 is an adult collectible display model, not a children's toy. Recommended for ages 14 and up. Contains many small parts — not suitable for children under 3 (choking hazard). Younger builders must build only under adult supervision.

All bricks are safe, non-toxic ABS. Dust with a soft dry cloth; keep away from direct sunlight, heat, water and damp. The base model needs no batteries. If the optional power-upgrade kit is added, follow standard battery-safety guidelines.

BrickRoyal is an independent brand. BR60559 is an original sci-fi design and is not affiliated with, licensed by, or endorsed by the LEGO Group, or with any film, television or media franchise. Any starfighter or aerospace styling is presented as original science-fiction model-design subject matter only and should not be understood as an officially licensed replica of any fictional spacecraft, character or franchise. The optional power-upgrade kit is sold separately; batteries are not included. After-sales: admin@brickroyal.com. General: support@brickroyal.com.