• 888 precision ABS bricks – molded to a tight clutch tolerance
• Motor, speaker, LED and mist components – fitted during the build
• Display base with control button – one red button runs everything
• Brass-tone gear clusters – overlapping layers visible from both sides
• Silver-plated outer edges with black corrugated hose detail
• Printed step-by-step manual – covers the power assembly alongside the brickwork
• Retail box

All four effects run from the single red control on the base. There is no separate switch for the light, the sound or the mist — one press starts them together, one press stops them.

• 🦴 Motorized beak – opens and closes on an exposed gear train
• 🟢 Green LED eye – the only green in the series, lit while the unit runs
• 🔊 Roar audio – speaker in the base, timed to the beak
• 🌫️ Mist breath – cool vapor drifts from the beak as the jaw opens
• 🎛️ Display stand included – one red button on the base runs everything

• One continuous line – the swept crest and long tapering beak form a single silhouette almost fifteen inches end to end
• Gear-dense centre section – brass gears sit in meshed clusters, with black hose looping through the gaps and red/blue accents marking the pivot points
• Silver-plated outer edges – everything inside is exposed machinery, readable from both sides
• Floating display stance – the stand holds the skull at an angle so it reads as motion rather than display
• Green LED eye – a single cold point at the centre of all that brass, unlike the red eyes of its series-mates

The BR0007 is designed for builders who enjoy:

• A green LED eye – the only one in the DinoMech series, and the fastest way to spot it on a shelf
• A gear-dense exposed mechanism – brass cogs, black hose, springs and pistons all left visible
• Four effects from one button – motorized beak, green LED, roar audio and mist breath all run together
• A large statement piece at 17.4 in tall and 14.9 in long – a centrepiece for a game room, study, or display cabinet

Brand: BRICKROYAL · SKU: BR0007 · Series: DinoMech · Pieces: 888

Assembled size: 14.9 × 6.3 × 17.4 in (W × D × H) / 37.8 × 16 × 44.3 cm

Gift box: 9.5 × 3.8 × 14.1 in / 24.2 × 9.6 × 35.8 cm · Shipping weight: 2.7 lb (1.24 kg)

Recommended age: 14+ · Build time: approx. 4–6 hours · Material: ABS plastic

Effects: Moving beak · green LED eye · roar audio · mist breath

Batteries: 6 × AAA (not included) · Runtime: approx. 30 minutes continuous

Mist reservoir: Purified or distilled water only

Instructions: Printed manual, included

Safety warning: Contains small parts – choking hazard. Not suitable for children under 14. Keep loose parts away from infants and toddlers. All bricks are made from non-toxic ABS material intended for adult-oriented model construction.

Mist note: Use purified or distilled water only. Never use oils, fragrances or any additive. Nothing is heated – the mist is cool vapor.

Care: Dust the skull with a soft dry cloth. Empty the mist reservoir when you're not running the model. Keep the motor, speaker and LED away from water when cleaning, and keep the finished piece out of prolonged direct sunlight so the silvers and brass tones hold their color.

About 15 inches of width and 17.4 inches of height, with roughly 6 inches of depth for the stand. The beak and crest both project out from the base, so give it clearance on either side rather than tucking it into a corner.

6 × AAA. Loose batteries can't be sent by international air freight, so no set ships with them. Standard alkaline AAA from any supermarket will do.

Around 30 minutes of continuous operation. Most owners switch it on to show it off rather than run it constantly, so a set lasts a good while.

No – all four effects run on the same circuit and start together from one button. If you want it silent, display it with the power off; the skull holds its pose either way.

Purified or distilled water only. Tap water leaves mineral scale that builds up and eventually clogs the nozzle. Never use oils, fragrances or any additive. Nothing is heated – the mist is cool vapor, and water is the only thing you ever need to refill.

Yes. The motor, speaker, LED and mist parts are fitted during the build rather than arriving as a sealed module, and the power assembly is part of the process. The printed manual covers those steps in the same illustrated format as the rest of the model.

Yes. The skull holds its pose whether or not the effects are running, so it works as a shelf piece on its own and you switch it on when you want it.

Same one-button operation and build logic across all four. The T-Rex is all silver with a long tooth-lined jaw; the Triceratops is wide through a brass-tone frill; the Dilophosaurus has the highest piece count and twin posable crests; the Pterosaur is the tallest and longest of the four, the most gear-dense, and the only one with a green eye. They're designed to sit together as a set.

Circle the missing part on the relevant manual page, take a photo, and email it with your order number to support@brickroyal.com. We'll send the replacement free of charge, with nothing to return.

The build is substantial enough to be a real project, and the finished piece actually does something – which is what makes it land better than a static model for a birthday, anniversary or Christmas.